Cleaning and Maintain Your Submersible Water Pump 2023

A submerged water pump is an important device to own at home. It is beneficial for people who dwell in rural settings away from the city's water system. The pumps are available in different capacities and sizes to meet users' needs. To ensure the smooth functioning of these water pumps, users should clean them regularly. If you have never cleaned one, find out below the way of cleaning and maintain your submersible water pump.

Materials You May Need

Cleaning and Maintain Your Submersible Water Pump
  • Rubber gloves.
  • Flashlight
  • Screwdriver.
  • Bucket of water.
  • Detergent.
  • Bleach.
  • Replacement filter.
  • Cloth
  • Rubbing alcohol.
  • Thin scrub brush. 

A Guide to Cleaning and Maintain Your Submersible Water Pump

How to Clean A Submersible Water Pump - Steps

Step 1

Turn off the primary electrical connection. It ensures safety by removing the danger of an electric shock while cleaning the pump.

Step 2

Put on the rubber gloves to maintain your hygiene. Shine your flashlight into the well to determine the location of your submerged pump. Remove the pump from the well. Removing the pump out may be difficult and dangerous, especially if the well is extra deep or if the pump is too big.

Most pumps are attached to hardware on the well's exterior. Loosen any available screws that hold the pump in place. Remove the tube’s ending attached to the pump by pushing it from the pump.

However, if it is not easily accessible, you may need to get it out manually. You require the help of another person, who remains above ground and pull the rope tied to the pump. As your helper gently lifts the pump, you should follow it carefully to ensure the pump does not get damaged in the process.

Step 3

Identify the water inlet, which resembles a screen that filters dirt from entering the pump. It may be invisible due to the excess debris and mold on it. As in most pumps, the water inlet can be located midway between the bottom and the top of the pump.

Fill a bucket with water and detergent. Submerge the water filter in the bucket with the solution. Shake the pump and filter rapidly through the solution to remove the debris. Use a brush to scrub the exterior and interior surfaces of the pump lightly.

If there is any stubborn residue, add a tiny amount of rubbing alcohol onto a dry cloth. Wipe each residual spot until they have all been eliminated. Use clean water to rinse the filter and the pump. If the filter is extremely dirty and incapable of eliminating all the residue, you should consider buying a replacement filter.

Step 4

Attach the cleaned filter to the pump. Reattach the tubing's end to the pump. You can now return it to the well, to its precise original location. If you removed the pump with another person, ensure their presence to help return it as slowly and carefully as possible. If the pump was previously reinforced, return the pieces of hardware.

Turn on the electricity to the pump to confirm if it is functioning well. You can open the faucets inside your home to check the water pressure. Then replace the cover. Maintain the water pump by inspecting it regularly and cleaning it whenever you can.

How to Maintain Your Submersible Water Pump - Steps

Taking adequate care of your submersible water pump ensures its durability and longer life. These are more tips on how to maintain and partly clean your water pump.

1. Lubrication

Lubricate the motors and the water pump as directed by manufacturers. Ensure you do not over-lubricate the pumps since it causes bearing harm. If there is a vent cap in the bearing, detach the cap and run the machine for half an hour before returning the pump.

2. Keep regular checks

Observation of the pump is vital. Check the machine's vibrations, unusual sounds, and water leaks regularly. It will help you assess the period when the pump needs maintenance.

3. Motor inspection

The motor is a vital component of your submersible water pump. It is important to check on motors as well. Ensure all terminations are tight and check the contractor or starter for arching and overheating. Avoid motor windings and winds from dirt and dust.

4. Avoid overheating

It occurs due to inadequate water levels in the well to cool off the pump. Overheating occurs when the pump malfunctions too. You should assess the heat levels regularly to avoid unnecessary repair costs.

5. Regular inspection

Users tend to disregard the maintenance and care of these pumps. The pumps can go for long without checking. To ensure they function smoothly and maintain their durability, inspect the pumps frequently. Frequent inspection helps assess the state of electrical wiring, seals, water leaks, and valves.

6. Flush pump after using

The length between the diffuser and the impeller is less in submersible pumps. At the same time, the flow rate and pressure are elevated in the pumps. A pure water flush is necessary to remove debris or dirt from under the pumps.

7. Replace damaged hoses and seals

Show wear, damages on hoses, and seals should be replaced immediately. To avoid slips and leaks, use impermanent rubber assembly grease.

Essential Tips to Note When Caring for Your Pump

When paying extra attention to your submersible water pump, kindly take note of the following;

  • Frequently check the oil drain hole and drain hole. Constrict if there is any irregularity.
  • Assess the electrical shock protectors, switches, and cables before using. All electrical appliances should usually function. The wires should be cautiously identified and not damaged.
  • Insulation resistance should be assessed at intervals before usage.
  • When testing the pump outside the water, ensure it does not take more than five minutes. It is to hinder the motor from burning and overheating.
  • The pump should be assessed for sensitive water after working for approximately 300 hours.
  • Check to ensure all safeguards are working well.
  • The pump is not meant to be buried in the mud.
  • Most importantly, if possible, you should recycle the water in the storage. Sometimes cleaning the pump may be a tiresome process if you have to do it now and then due to the extremely dirty water.


Regular cleaning and maintain your submersible water pump ensures durability. Cleaning the water pump often makes the water flow smooth and clean. It reduces the chances of contamination by debris and water bacteria that may be harmful to you. If cleaning your pump seems like a tough task, you should hire professional water pump cleaners to do if for you.

About the Author Seth Gold

Seth Gold is a Blogger and Writer, Writing for the last 3 years on Home improvement, DIY, Gardening, and many more things where people get the latest free product information and buying guide.

Leave a Comment: